Not obtaining same results on verification report

[lacampos3]

Dear Seismostruct Support,

I am running the program titled "Ch4-blind-02A" on the verification report and am not obtaining the same top nodal displacement (at Top_2) curve as that displayed in the verification report. For the first 40 seconds, the max. top displacement I get is about 6mm at around 15 seconds.

Any help will be greatly appreciated.

[seismosoft]

Hi,

The plot in the Verification Report refers to the 3rd acceleration time-history introduced in the structure (EQ3 - see figure legend), whilst the results you have obtained refer to the first accelerogram (EQ1).

Regards,

Seismosoft Support