Modelling partially infill wall panel
-
- Posts: 18
- Joined: 26 Jul 2019, 01:16
Modelling partially infill wall panel
Is possible modelling partially infilled wall using Crisafulli Model?
- seismosoft
- Posts: 1199
- Joined: 06 Jul 2007, 04:55
Re: Modelling partially infill wall panel
Yes, but you need to calibrate the 6 infill panel curves (diagonal and shear struts) to consider the openings, by introducing lower strength and stiffness.
Seismosoft Support
Seismosoft Support