Extract Axial Forces

[Christine23]

Hi seismosoft group,

I am trying to extract only the axial forces of a specific load combination (e.g. G+0.3Q, it's according to Eurocode) for the vertical elements (walls and columns), how can I check them? Is there any way to extract them as an Excel table? Do I have to check every element separately?
Thank you in advance.

[z.gronti]

Dear Christine23,

You may run the pushover analysis, go to the post-processor, i.e. Show results area, and check the values you are interested in for Output No.1 Load Factor: 0.00, where only the static loads are applied.

[Christine23]

Where could I find post processor in seismobuild?
I run the pushover analysis and on the left there is a column with: building modelling, code requirements, eigenvalue analysis, pushover analysis, checks and report. Do i have to create a report? Or do I check the results in pushover analysis tab?

[z.gronti]

Dear Christine23,

After running the pushover analysis, you should select the "Show Results" button, in order for you to be able to check the results of the pushover analysis.