Seismic Hazard Output not Matching

[Kirkaguel]

Good Day Technical Support,

I was reviewing the output from the pdf report and I noticed that the graphical representation of the seismic hazard level does not match with the tabulated report. The tabulated report is incorrect for the Collapse Prevention Hazard Level.

see images below

https://www.dropbox.com/scl/fi/5l07dkmo ... mk6vk&dl=0

https://www.dropbox.com/scl/fi/0rht5kia ... 9ph4l&dl=0

[z.gronti]

Dear Kirkaguel,

Thank you for reporting it. It will be fixed in the upcoming release.