Hello,
Using Seismobuild 2023 (professional license) i figure every time we have to run the model due to some geometric change, we are forced to define spectrum and limit states again.
Settings on first definition:
Automatically changed settings on software further (re)runs:
How can i solve this?
Thanks
Losting spectrum and limit state definition
- seismosoft
- Posts: 1199
- Joined: 06 Jul 2007, 04:55
Re: Losting spectrum and limit state definition
We could not download the image files that you have attached and we could not understand what you meant simply from the text.
Seismosoft Support
Seismosoft Support
Re: Losting spectrum and limit state definition
See below image links in same order:
https://ibb.co/nmHr6x2
https://ibb.co/K2cwS3Q
https://ibb.co/f9HkVg6
https://ibb.co/B480RJp
Thanks
https://ibb.co/nmHr6x2
https://ibb.co/K2cwS3Q
https://ibb.co/f9HkVg6
https://ibb.co/B480RJp
Thanks
Re: Losting spectrum and limit state definition
Dear RRufino1,
When you select to define Code-based Spectra through the "Other Spectral Shapes" option, the information you assign within the "Set Input Spectrum" module is not saved. However, the created Spectra are saved and you do not need to define them again. If you check the spectra that you create carefully, you will confirm that are not modified.
When you select to define Code-based Spectra through the "Other Spectral Shapes" option, the information you assign within the "Set Input Spectrum" module is not saved. However, the created Spectra are saved and you do not need to define them again. If you check the spectra that you create carefully, you will confirm that are not modified.
Zoi Gronti
Seismosoft Srl.
Seismosoft Srl.
Re: Losting spectrum and limit state definition
Dear Zoi,
Thanks, nevertheless, in my opinion it's a good principle to save this info. I'm imagining to have other colleague dealing with one of my models or either i to look for some model i made faraway in the past.
Thanks, nevertheless, in my opinion it's a good principle to save this info. I'm imagining to have other colleague dealing with one of my models or either i to look for some model i made faraway in the past.
Re: Losting spectrum and limit state definition
Dear RRufino1,
Thank you for your suggestion. We will keep a note about it and possibly implement it in a future release of the program.
Thank you for your suggestion. We will keep a note about it and possibly implement it in a future release of the program.
Zoi Gronti
Seismosoft Srl.
Seismosoft Srl.