Dear Colleagues
greetings
I want to know can SesmoStruct determine the punching force in the joint between concrete slab and supporting column in the flat slab building? if yes, please tell me HOW? THANKS.
The second questions is how to apply the 3 ground motions(in X, Y and Z directions) in time history analysis simultaneity for one structures?
Thanks
punching force
Re: punching force
I'm not certain about the punching shear issue, but I imagine that Seismostruct is not ideal for predicting such behavior. There may be ways to mimic the mechanism with links and the like.
Regarding the simultaneous application of accelerations in X, Y, and Z directions - simply define the three separate curves and create dynamic acceleration loadings at the support nodes for the three separate curves in their respective directions.
Best of luck.
Regarding the simultaneous application of accelerations in X, Y, and Z directions - simply define the three separate curves and create dynamic acceleration loadings at the support nodes for the three separate curves in their respective directions.
Best of luck.
Tim Huff