Seismosoft | Earthquake Engineering Solutions

Thanks for the nice sharing.

In using SeismoMatch, a software tool for adjusting earthquake records to match a target response spectrum, the issues you're encountering with convergence and tolerance are not uncommon. Here are some comments and suggestions:

Convergence Issues: Convergence problems can occur due to various ...

It appears that you are looking for advice on defining and modeling yielded rebar in simulating reinforced concrete (RC) frames. Yielded rebar refers to steel reinforcement bars that have experienced yielding, a condition where the steel has been stressed beyond its elastic limit but has not yet ...

It seems like you are using SeismoStruct for pushover analysis on a cantilever-reinforced concrete (RC) column and are interested in generating strain profiles in the longitudinal reinforcement along the height of the column. While I don't have specific knowledge about SeismoStruct, I can provide ...

Modeling and analyzing coupling beams in coupled shear walls for seismic evaluation using SeismoStruct is a complex engineering task. Here's a general outline of the steps you can follow:


Modeling the Shear Walls:
Model the coupled shear walls according to your building's configuration. Ensure ...

Correcting an earthquake accelerogram such that its velocity at the end of the duration is zero is a common requirement in earthquake engineering and structural analysis. This process is known as baseline correction or velocity integration. Seismospect is a software that primarily focuses on ...

Correcting an earthquake accelerogram to ensure that the final velocity is zero involves processing the accelerogram to remove any trend or drift, which usually arises due to the integration of acceleration to obtain velocity and displacement. This drift is known as baseline correction.

The general ...

To determine the mass of the structure by floors in SeismoStruct, follow the general procedure outlined below. Please note that this is a general approach, and the specific steps might differ based on the version of SeismoStruct you are using:

Open Seismo Struct:
Start by launching Seismo Struct on ...

The post suggests the importance of modeling the actual structural elements like ribs or joists which are commonly found in building slabs. It also mentions the application of FRP in both strips and fabric wrap forms for slab and beam strengthening.

Hello Angelo Farnetano,

It's great to hear that you've started using Seismosoft for your analysis. I can help clarify some issues you're encountering with your Fourier Spectrum from the accelerogram.

The Fourier Spectrum is a plot that shows the amplitudes of various frequency components present ...