Showing infill walls under "Checks Tabs"
Posted: 17 Jan 2024, 01:54
Under checks tab, the infill walls are automatically not shown. Usually, we take a snap of the structure showing failed members. It's quite confusing because the structure is not showing any infill walls, even though they were modelled. (We got comments/clarifications about this from client reviewers).
I suggest that there's an option under the Checks Tab to show or not the infill walls. Adding a feature about its transparency would also help. For example, if you show infill walls and set the transparency to, say 50%, then the columns, RC walls, beams behind the infill walls will still be visible.
I suggest that there's an option under the Checks Tab to show or not the infill walls. Adding a feature about its transparency would also help. For example, if you show infill walls and set the transparency to, say 50%, then the columns, RC walls, beams behind the infill walls will still be visible.