Seismosoft | Earthquake Engineering Solutions

Is it possible to show the pushover curve in Seismobuild showing the pushover curve with post peak stiffness and strength degradation. We would like see the overall behaviour of the system if the target seismic hazard is exceeded. This is kind of similar to the ASCE 41 idealized Force-Displacement curve.

I have seen one post here with this graph but I think this output is from Seismostruct.

https://www.dropbox.com/scl/fi/7nxbsq2r ... 57t9o&dl=0

https://www.dropbox.com/scl/fi/ma4ydj1m ... k2xmd&dl=0

Unfortunately, this is not possible. However, you can copy and paste the data to Excel and make the calculations there .
Seismosoft Support