Seismic Hazard Output not Matching
Posted: 25 Nov 2023, 02:25
Good Day Technical Support,
I was reviewing the output from the pdf report and I noticed that the graphical representation of the seismic hazard level does not match with the tabulated report. The tabulated report is incorrect for the Collapse Prevention Hazard Level.
see images below
https://www.dropbox.com/scl/fi/5l07dkmo ... mk6vk&dl=0
https://www.dropbox.com/scl/fi/0rht5kia ... 9ph4l&dl=0
I was reviewing the output from the pdf report and I noticed that the graphical representation of the seismic hazard level does not match with the tabulated report. The tabulated report is incorrect for the Collapse Prevention Hazard Level.
see images below
https://www.dropbox.com/scl/fi/5l07dkmo ... mk6vk&dl=0
https://www.dropbox.com/scl/fi/0rht5kia ... 9ph4l&dl=0
