Seismosoft | Earthquake Engineering Solutions

Hi!

I've solved a problem with this Range Check error. The problem was I gave too much parameters at Element Classes->Link Element Types, also I gave in all the X, Y and Z directions the Richard-Abbott curve. I changed, that I give only one direction this Richard-Abbott curve (the others are only "lin_sym" curve type), and the problem was solved.

I hope I could help.

Ádám

Dear Ádám,

Thanks for this constructive note. We will nonetheless look into this issue so as to avoid 'range check error' messages in the situations you describe.

Seismosoft Support

An update just to note that we were not able to reproduce the anomalous behaviour reported above. If you have a model file that gives rise to such error, please send it to us, and we will look into it.

Seismosoft Support