Seismosoft | Earthquake Engineering Solutions

Hello,

Using Seismobuild 2023 (professional license) i figure every time we have to run the model due to some geometric change, we are forced to define spectrum and limit states again.

Settings on first definition:




Automatically changed settings on software further (re)runs:




How can i solve this?
Thanks

We could not download the image files that you have attached and we could not understand what you meant simply from the text.
Seismosoft Support

See below image links in same order:

https://ibb.co/nmHr6x2
https://ibb.co/K2cwS3Q
https://ibb.co/f9HkVg6
https://ibb.co/B480RJp

Thanks

Dear RRufino1,

When you select to define Code-based Spectra through the "Other Spectral Shapes" option, the information you assign within the "Set Input Spectrum" module is not saved. However, the created Spectra are saved and you do not need to define them again. If you check the spectra that you create carefully, you will confirm that are not modified.

Dear Zoi,

Thanks, nevertheless, in my opinion it's a good principle to save this info. I'm imagining to have other colleague dealing with one of my models or either i to look for some model i made faraway in the past.

Dear RRufino1,

Thank you for your suggestion. We will keep a note about it and possibly implement it in a future release of the program.