Seismosoft | Earthquake Engineering Solutions

Dear Friends
I couldn't find any segment for definition of support reinforcements (left and right ends of the beam) in section definition module.
It seems that it is possible to define the end reinforcement in building modeler but building modeler is not that much practical specially in large buildings.
I would be grateful if you share any information in this field with me.
Regards

You need to specify different sections in the Sections module and in the Element Classes module check Different Integration Sections and specify the defined sections at the different integration sections of the element. The defined sections (in the Sections module) should have the same dimensions, but can have different reinforcement.
Seismosoft Support