Page 1 of 1
Pushover Analysis per Floor Level
Posted: 08 Oct 2021, 11:09
by marking
Is it possible to conduct a multi-story static pushover analysis in Seismostruct, such that the analysis output is the individual storey displacements per base shear? If possible, how could I do/implement this in Seismostruct?
Re: Pushover Analysis per Floor Level
Posted: 08 Oct 2021, 13:43
by z.gronti
Dear marking,
You are not able to automatically export the individual storey displacements vs. base shear. You may post-process the results in a spreadsheet application. All the necessary information, such as storeys' displacements and the base shear, may be found in SeismoStruct's post-processor.