Page 1 of 1
Drift values for static pushover analysis
Posted: 22 Oct 2019, 04:03
by Bhagyashree
I am performing pushover analysis for 2d frame in seismostruct...I want to check Base shear versus Story drift ratio as my results...Is there any option to get the drift ratio??Cause I am getting base shear vs displacement as the results...I am in quite hurry...plz ans and help me...thanks in adv.
Re: Drift values for static pushover analysis
Posted: 22 Oct 2019, 04:41
by Bhagyashree
Again I want stroy wise drift...will anybody help me plz...
Re: Drift values for static pushover analysis
Posted: 22 Oct 2019, 13:23
by seismosoft
In SeismoStruct it is possible to extract the relative displacement between two nodes both in the Structural Displacement and the Hysteretic Curves sections. However, it is not possible to directly extract the interstorey drift.
Please refer to the user manual for the post-processing facilities available.
Seismosoft Support