Seismosoft | Earthquake Engineering Solutions

Hi , good time
I use Seismostruct for first time and i modeled a six & nine storey two dimensional reinforced concrete building with infill and without infill.
To analyze the time history of each frame, I use 12 earthquake records.
Frames are not analyzed & not run with some records and do fbd_tol send messages.
Please advise. Thank you

Hello Maziar,
If you search the forum posts, you will find plenty of resources on convergence problems. Also have a look at the relevant video in our Youtube channel, and the relevant section on the manual.
Seismosoft Support