Seismosoft | Earthquake Engineering Solutions

Dear SeismoTeam
there seem to be an error in the Rebar Typology.
when the user changes the rebar typology from European Sizes to US Sizes,the confirm message appears :For Example:Eurpean sizes: 20mm<.....>US Sizes: 8 in.
Which will be 20 "cm"=8 in

Thanks
BR
Behnam

Dear Behnam,

As you correctly noticed, the confirmation message that appears when you change the rebar typology is not correct. The correct message will be "For Example: European Sizes: 20mm<.....>US Sizes: #6.".