Fiber Section Discretization

05-Future developments & requests
Post Reply
Pez
Posts: 4
Joined: 10 Sep 2015, 14:11

Fiber Section Discretization

Post by Pez »

Hi,

It would be better to increase max number of fibers in a section or adding a tool to subdivide section into fibers manually in a symmetric way with rectangular fibers. For example I can not divide the cover part into more fibers to have more gradual cracking or the size and density of fibers in large section like wall sections are nonuniform.

Regards,

Pez

User avatar
z.gronti
Posts: 483
Joined: 16 Oct 2013, 08:14

Re: Fiber Section Discretization

Post by z.gronti »

Dear Pez,

You may increase the number of section fibres within the Element Class module.
Zoi Gronti
Seismosoft Srl.

Pez
Posts: 4
Joined: 10 Sep 2015, 14:11

Re: Fiber Section Discretization

Post by Pez »

Dear Gronti,

I know that but I mean there is no feature to increase the fiber numbers in section edges. For example for large shear wall sections you have to increase a number and software subdivide the section with non-uniform mesh density with triangle fibers through cross section. It is not possible to divide cover concrete. There is no possibility to control fiber number and pattern through cross section that is what I mean.

Thanks,

Pez

User avatar
seismosoft
Posts: 653
Joined: 06 Jul 2007, 04:55

Re: Fiber Section Discretization

Post by seismosoft »

Dear Pez,

Thank you for your suggestion to allow the user to specify the number of fibres at each region of the section independently. We will consider for implementation in a future version of the program.

Seismosoft Support

Nayna
Posts: 2
Joined: 04 Apr 2019, 10:09
Contact:

Re: Fiber Section Discretization

Post by Nayna »

Thanks for this valuable information.

Post Reply

Return to “05-Future developments & requests”