Seismosoft | Earthquake Engineering Solutions

Hi,
As anew user of Seismostruct i started with a simple 3 D structure.
After the second run of the processor came a message as follows:
Access violation at address 695A 402C in module nvoglv32.dll
write of address 695F1CAO
After that the whole system is blocked. After a restart and reloading
the same file the same error results.
If you need my file for the investigation i wil of course send it to you by e-mail.
greetings fedde brouwer

Hello,

You can send us your model indeed, but we suspect that the problem you report is related to the OpenGL support of your video card (which, by the sound of it, is from nVidia, right?). If you google "nvoglv32.dll" or "nvoglnt.dll" you will find a wealth of information on such problems.

If your video card is indeed from nVidia, please try downloading and installing the most recent drivers for such card, and see if that does the trick.

In order to double-check the origin of the problem, you may also try running the analysis in a different computer, and see if the problem presents itself or not. If it does not, then there is definitely a problem with your system.

Seismosoft Support