Seismosoft | Earthquake Engineering Solutions

I have problem about ground velocity and displacement graphs which are plotted in time series part,I entered the elcntro accelerogram then programme plot the velocity and displacement graphs but the results are not logical,for example the maximum displacement was 21m.
even I entered the accelerogram of example 1 which was in Help, but it dosent result to velocity and displacement as the same .please guide me,
Regards
Samina

The results you describe are typical of the processing of un-filtered records. Use filtering and baseline correction to avoid it, making sure you first read the extensive literature on the subject though.

Seismosoft Support