one modeling problem

02-Getting started with the modelling
Post Reply
L.mojtahedi
Posts: 2
Joined: 15 Nov 2023, 08:15

one modeling problem

Post by L.mojtahedi »

Hi
How to define the material of stirrup and the material of longitudinal rebar differently?
Thanks
huffte
Posts: 983
Joined: 22 Jul 2011, 10:19
Location: Cookeville, Tennessee, USA
Contact:

Re: one modeling problem

Post by huffte »

Simply define separate material properties for each in the "Materials" tab and choose the appropriate "Reinforced Concrete" section in the "Sections" tab. Each of the reinforced concrete sections permits the use of different materials for the stirrups (transverse reinforcement) and the flexural/axial bars (longitudinal reinforcement).
Tim Huff
L.mojtahedi
Posts: 2
Joined: 15 Nov 2023, 08:15

Re: one modeling problem

Post by L.mojtahedi »

Thank you very much for your answer. is this possible in 2016 ver.?
User avatar
z.gronti
Posts: 824
Joined: 16 Oct 2013, 08:14

Re: one modeling problem

Post by z.gronti »

Dear L.mojtahedi,

This feature was not available in v2016.
Zoi Gronti
Seismosoft Srl.
Post Reply

Return to “02-Getting started with the modelling”