Code Based Spectra Curve

[TT_OKU]

Hello,

I intent to change an option as:
"Seismic action (Target Spectrum)" -> "Seismic action -> code-based spectra -> TBDY related assigned parameters

but, although these parameters are assigned, the spectrum figure does not changed.

I share the steps, which is followed, with you as a pdf file as:

https://drive.google.com/file/d/1E7NHFZ ... sp=sharing

Please: especially, let us consider the attached box with red colour in 2., 4., 5. pictures.

Is it normal?

[z.gronti]

Dear TT_OKU,

The defined spectrum with the acceleration shown in your second image is the spectrum for the Life Safety performance level, as you may confirm from your third screenshot with the Hazard Levels Multipliers. You should select the Life Safety performance level in order to be able to view the corresponding target pectrum.

[TT_OKU]

Dear Zoi Gronti,

Thanks for your reply,

As you indicate, it is required to simultaneously activate the related level under "performance levels" in accordance with an adjustment of "seismic action (Target Spectrum)".