Shear Demand from Performance Based Criteria

03-Analytical/modelling capabilities
Post Reply
roshen.rj
Posts: 41
Joined: 10 Feb 2020, 07:57

Shear Demand from Performance Based Criteria

Post by roshen.rj »

Hi

I am currently working on an RC frame in the Dynamic Time-history analysis. I would like to know how it is possible to obtain the Shear demand values versus time of each of the elements from the performance criteria. I am have defined the performance-based criteria for all 'frame element shear capacity automatically defined limit'. Although I get some shear failure values of the elements in analysis logs, how can I obtain the entire time history values?

Thank you

Kind Regards
Roshen
huffte
Posts: 978
Joined: 22 Jul 2011, 10:19
Location: Cookeville, Tennessee, USA
Contact:

Re: Shear Demand from Performance Based Criteria

Post by huffte »

1. Post-Processor
2. Element Action Effects
3. Frame Forces
4. Select the desired shear direction and element(s)
5. Refresh
6. Select 'Values' to get the actual values or 'Graph' to plot

I hope this helps Roshen.
Tim Huff
Post Reply

Return to “03-Analytical/modelling capabilities”