Bracing is not getting connected to Beam
-
- Posts: 3
- Joined: 10 Aug 2019, 06:35
Bracing is not getting connected to Beam
Version-2018. I am using inelastic force braced frame element as beam and inelastic truss element as bracing. I want to give pin connection at middle of beam, to that I want to connect bracing. When I use to connect like that it is showing zero diagonal error. :cry:
- seismosoft
- Posts: 1184
- Joined: 06 Jul 2007, 04:55
Re: Bracing is not getting connected to Beam
The warning does not mean that the model is wrong. It is just a warning.
If you use the Skyline solver that can accommodate for zero diagonals in the stiffness matrix, the analysis should be ok (provided of course that the model is correct and stable).
Seismosoft Support
If you use the Skyline solver that can accommodate for zero diagonals in the stiffness matrix, the analysis should be ok (provided of course that the model is correct and stable).
Seismosoft Support