Eccentric time history displacement load

02-Getting started with the modelling
Post Reply
sayali
Posts: 1
Joined: 30 Jan 2018, 21:03

Eccentric time history displacement load

Post by sayali »

I am modeling an RCC column in Seismostruct. How can I apply an eccentric load on my column (Static time history displacement)?
huffte
Posts: 978
Joined: 22 Jul 2011, 10:19
Location: Cookeville, Tennessee, USA
Contact:

Re: Eccentric time history displacement load

Post by huffte »

If your intention is to apply an eccentric vertical load, an axial load in combination with a moment about the appropriate axis would work. If you are trying to apply an eccentric mass, then a rigid link offset from the column note or a lumped mass in combination with a rotary inertia should work.
Tim Huff
Post Reply

Return to “02-Getting started with the modelling”