Processing a group of accelerograms

02-Analytical capabilities
Post Reply
alclim
Posts: 2
Joined: 16 Sep 2010, 12:00

Processing a group of accelerograms

Post by alclim »

Hi. I would like to know if there is any application for processing at the same time a group of accelerograns using SeismoSignal.

Thanks

Alvaro
huffte
Posts: 978
Joined: 22 Jul 2011, 10:19
Location: Cookeville, Tennessee, USA
Contact:

Re: Processing a group of accelerograms

Post by huffte »

alclim, you can use SeismoSpect to process multiple accelerograms. You wont have SeismoSignal's "Response Time Histories" or "Fourier and Power Spectra" tabs in SeismoSpect however. If you are primarily interested in response spectra and ground motion parameters with filtering and correction capabilities, SeismoSpect may suit your needs ideally.
Tim Huff
alclim
Posts: 2
Joined: 16 Sep 2010, 12:00

Re: Processing a group of accelerograms

Post by alclim »

Thank you Tim for your advice

Then I will try with the SeismoSpect program.

Alclim
Post Reply

Return to “02-Analytical capabilities”