Dynamic Time History Analysis

04-Unexpected behaviour/errors
Post Reply
Saurabh Kumar Sarma
Posts: 1
Joined: 23 Sep 2018, 07:03

Dynamic Time History Analysis

Post by Saurabh Kumar Sarma » 26 Dec 2018, 09:21

While carrying out dynamic time history analysis for a 2-D frame, everything from the mass directions to the ground motion direction, I have selected along the x direction only. But after the analysis has completed, on checking the deformed shape, the frame has been found to deform along the y direction also. How can it be solved?

Posts: 838
Joined: 22 Jul 2011, 10:19
Location: Cookeville, Tennessee, USA

Re: Dynamic Time History Analysis

Post by huffte » 26 Dec 2018, 15:25

Some more details about your model would be helpful. This sort of question is impossible to answer without more detail, it seems to me. Perhaps I am wrong though.
Tim Huff

User avatar
Posts: 592
Joined: 06 Jul 2007, 04:55

Re: Dynamic Time History Analysis

Post by seismosoft » 30 Dec 2018, 11:33

What you could do is to fixed the out-of-plane deformations (y+rx+rz) in the Restrains page, for all nodes.
Seismosoft Support

Post Reply