shear capacity automatic calculation

04-Unexpected behaviour/errors
Post Reply
zthaer
Posts: 57
Joined: 12 Apr 2014, 15:07

shear capacity automatic calculation

Post by zthaer »

dear all;
after i saw unexpected behavior of 4 story RC building under conventional pushover, i check the shear capacity using the performance criteria section on per-processor module. i found that many elements reached the shear capacity even before running the analysis.
so, i make a hand calculation to be sure that the building is suffering from shear. and what i found in that the calculations are not matching with the automatic values.
since the shear strength comes from both the section geometry and shear reinforcement, i observe that the automatic values are closer to the latter one.
Vn=Vc+Vs
Vc=0.17(25)^.5(bwd)
Vs=Av(420)(d)/s
where the photo shows the sections and the result:
https://drive.google.com/file/d/0BzZ5tJ ... sp=sharing
Image
any help please because i got lost .
best;
Thaer,
Post Reply

Return to “04-Unexpected behaviour/errors”