Dear,
I would like to model Masonry structures according to chapter 11 of ASCE 41-17. Please let me know which software may be useful??
Thank you in advance,
Sincerely
Masonry structures modeling according to chapter 11 of ASCE 41-17
-
- Posts: 13
- Joined: 13 Nov 2019, 13:37
Re: Masonry structures modeling according to chapter 11 of ASCE 41-17
Dear rezalatifi,
You may use the masonry element available in SeismoStruct.
You may use the masonry element available in SeismoStruct.
Zoi Gronti
Seismosoft Srl.
Seismosoft Srl.
-
- Posts: 13
- Joined: 13 Nov 2019, 13:37
Re: Masonry structures modeling according to chapter 11 of ASCE 41-17
Dear,
Thanks for the reply.
There are some safety checks/possible failure mechanisms/acceptance criteria for unreinforced/reinforced masonry structures, e.g., Toe-crushing/bed-joint sliding strength. How is possible to check them??
Sincerely,
Thanks for the reply.
There are some safety checks/possible failure mechanisms/acceptance criteria for unreinforced/reinforced masonry structures, e.g., Toe-crushing/bed-joint sliding strength. How is possible to check them??
Sincerely,
Re: Masonry structures modeling according to chapter 11 of ASCE 41-17
Dear rezalatifi,
Please refer to Appendix H2-ASCE of SeismoStruct's User Manual so that you will be able to learn how Code-based checks are executed for masonry sections in SeismoStruct.
Please refer to Appendix H2-ASCE of SeismoStruct's User Manual so that you will be able to learn how Code-based checks are executed for masonry sections in SeismoStruct.
Zoi Gronti
Seismosoft Srl.
Seismosoft Srl.