coupling beams

02-Getting started with the modelling
yahia
Posts: 3
Joined: 25 Dec 2018, 22:56

Re: coupling beams

Post by yahia » 17 Apr 2019, 21:34

dear seismosoft
i carried out a verification model for coupling shear wall and applied cyclic load by choosing static time history analysis, the model run without any problem .But no result in curve.
To clarify my words, i attached the SPf file . please , run the model and tell me if i modeled it right? and applied the loads right ?
https://www.dropbox.com/s/ydz538c3sutvc ... W.spf?dl=0
you can also find anther attached PDF file for verification model
https://www.dropbox.com/s/3zpowm3b4zqs5 ... 1.pdf?dl=0

User avatar
seismosoft
Posts: 564
Joined: 06 Jul 2007, 04:55

Re: coupling beams

Post by seismosoft » 19 Apr 2019, 14:19

There are calculated results from the analysis, if you go to the action effects viewer in the post-processor you will realised that the model is loaded.
If you mean the curve that appears during the analysis time, this is because you are applying loads in the Z direction but you have selected to view the response in the X direction.
Seismosoft Support

Post Reply