Incremental Dynamic analysis
-
- Posts: 19
- Joined: 11 Oct 2017, 09:50
Incremental Dynamic analysis
the error occurred every time that, Unable to apply next load step. Analysis is terminated
Re: Incremental Dynamic analysis
Dear iamvishal1,
You will find a number of posts on this matter if you carry out a search on this forum for the term "unable to apply".
Also, you may find a list with the convergence difficulties that may arrise and their solution in the User Manual, the Help System and in the video below:
https://www.facebook.com/22301629122752 ... 444459842/
https://www.youtube.com/watch?v=p6tAyoofDog
You will find a number of posts on this matter if you carry out a search on this forum for the term "unable to apply".
Also, you may find a list with the convergence difficulties that may arrise and their solution in the User Manual, the Help System and in the video below:
https://www.facebook.com/22301629122752 ... 444459842/
https://www.youtube.com/watch?v=p6tAyoofDog
Zoi Gronti
Seismosoft Srl.
Seismosoft Srl.
-
- Posts: 19
- Joined: 11 Oct 2017, 09:50
Re: Incremental Dynamic analysis
Thank you very much sir for sharing important information.
-
- Posts: 19
- Joined: 11 Oct 2017, 09:50
Re: Incremental Dynamic analysis
Sir,
Again the same error occurred .
I am doing incremental dynamic analysis scale factor 0.70 upto here the process done but again Analysis stop n that Unable to laod next step .
This happens. Plz Guide for that ...
Again the same error occurred .
I am doing incremental dynamic analysis scale factor 0.70 upto here the process done but again Analysis stop n that Unable to laod next step .
This happens. Plz Guide for that ...
Re: Incremental Dynamic analysis
Dear iamvishal1,
If your model is correct and you have made the adequate modifications proposed in the list with the convergence difficulties, and the analysis is not completed, then your model might not stand the applied load.
If your model is correct and you have made the adequate modifications proposed in the list with the convergence difficulties, and the analysis is not completed, then your model might not stand the applied load.
Zoi Gronti
Seismosoft Srl.
Seismosoft Srl.