higher accuracy between spectrums

02-Analytical capabilities
Post Reply
ag110
Posts: 9
Joined: 13 Apr 2011, 07:57

higher accuracy between spectrums

Post by ag110 »

Dear seismosoft

can you please guide me how can I increase accuracy between target and match spectrum in the setting module of SeismoMatch software?

Best Regards
Stelios_Antoniou
Posts: 89
Joined: 17 Jul 2011, 20:08

Re: higher accuracy between spectrums

Post by Stelios_Antoniou »

To increase accuracy, readily change (decrease) the tolerance from the Program Settings>Matching Parameters>Mismatch Tolerance, or simply the Tolerance value at the bottom left of the main program window.
User avatar
seismosoft
Posts: 1184
Joined: 06 Jul 2007, 04:55

Re: higher accuracy between spectrums

Post by seismosoft »

Dear ag110,

We would like to note, however, that the issue you raise is not really one of "accuracy", but rather one of tighter matching, which will inevitably lead to the need for modifying further the original accelerograms, which may not be desirable or advisable.

See the discussions on this topic in the Help System (especially the many tips&hints in the notes at the bottom of some pages) and also in this Forum.

Seismosoft Support
Post Reply

Return to “02-Analytical capabilities”