Hi , good time
I use Seismostruct for first time and i modeled a six & nine storey two dimensional reinforced concrete building with infill and without infill.
To analyze the time history of each frame, I use 12 earthquake records.
Frames are not analyzed & not run with some records and do fbd_tol send messages.
Please advise. Thank you
Dynamic time history analysis
- seismosoft
- Posts: 1184
- Joined: 06 Jul 2007, 04:55
Re: Dynamic time history analysis
Hello Maziar,
If you search the forum posts, you will find plenty of resources on convergence problems. Also have a look at the relevant video in our Youtube channel, and the relevant section on the manual.
Seismosoft Support
If you search the forum posts, you will find plenty of resources on convergence problems. Also have a look at the relevant video in our Youtube channel, and the relevant section on the manual.
Seismosoft Support